Episode #10 | Big Data Analytics and the Brilliant Grid

Episode #10 | Big Data Analytics and the Brilliant Grid
Episode #10 | Big Data Analytics and the Brilliant Grid This episode of The Energy Exchange is focused on data connectivity between applications and the information it generates that goes beyond Big Data and Smart Algorithms, as well as how IT plays a key role in using the information received from connected systems. Anyone who has purchased an item, or even just simply looked at certain items online, has experienced the magic of related sug...

Effective Angle Prediction Algorithm for Utilization of PMU Data: Toward Prevention of Wide Area Blackouts | IEEE Xplore

Effective Angle Prediction Algorithm for Utilization of PMU Data: Toward Prevention of Wide Area Blackouts | IEEE Xplore
Effective Angle Prediction Algorithm for Utilization of PMU Data: Toward Prevention of Wide Area Blackouts Published via IEEE Xplore Abstract Advanced state estimation and angle prediction algorithms utilizing the data measured by Phasor Measurement Units (PMU) can limit the spread of wide area blackouts. Advanced prediction analysis provides information on the overall condition of the power system and allows for the most efficient remedial action...

Data Center Demand Response | Distributed Energy Magazine

Data Center Demand Response | Distributed Energy Magazine
Data Center Demand Response Published March 11, 2019 | Distributed Energy Magazine Sean Morash, Consultant, EnerNex Carsten Baumann, Schneider Electric     Data centers represent roughly 2% of US electricity usage. Because of the digitalization of the modern economy, the thirst for computer power—ultimately served by data centers—continues to grow. At the same time, electrical usage by other end-uses has remained relatively flat...

EnerNex Selected to Work with the Public Utilities Commission of Ohio in Support of its Grid Modernization Efforts

EnerNex Selected to Work with the Public Utilities Commission of Ohio in Support of its Grid Modernization Efforts
EnerNex Selected to Work with the Public Utilities Commission of Ohio in Support of its Grid Modernization Efforts Released via BusinessWire Knoxville, Tenn., USA, March 12, 2019 —EnerNex, a CESI company, today announced it has been selected by the Public Utilities Commission of Ohio (PUCO) as the technical consultant to advise the PUCO staff and to facilitate the Data & Modern Grid Workgroup (DWG) and the Distribution System Planning Workgroup (...

Episode #9 | Behind the Door of OpenADR

Episode #9 | Behind the Door of OpenADR
Episode #9 | Behind the Door of OpenADR OpenADR is an open, highly secure, and two-way information exchange protocol and global Smart Grid standard supporting grid modernization efforts around the world. Host Ron Chebra of EnerNex gains insight from Rolf Bienert, Managing and Technical Director of the OpenADR Alliance, on the history of the OpenADR standard– how it started in California but has now come into the global market to enable utilities and agg...

Breaker Switching Analysis for Wind Power Plants

Breaker Switching Analysis for Wind Power Plants
Breaker Switching Analysis for Wind Power Plants By: Bikash Poudel, Senior Consultant bpoudel@enernex.com 865-218-4600 x6168     Vacuum Circuit Breaker (VCB) switching for protection and control operations in electric power systems may cause high frequency transients overvoltage that can affect the transformers nearby. These transients exhibit phenomenon such as current chopping, pre-strike and re-strike. Studies done by EnerNex h...

Fault Induced Delayed Voltage Recovery (FIDVR) Phenomenon: Modeling and Guidelines

Fault Induced Delayed Voltage Recovery (FIDVR) Phenomenon: Modeling and Guidelines
Fault Induced Delayed Voltage Recovery (FIDVR) Phenomenon: Modeling and Guidelines By: Sarina Adhikari, Senior Consultant sadhikari@enernex.com 865-218-4600 x6177     Broadly speaking, voltage sensitive loads are classified into two different categories: static or steady state, and dynamic loads. Accurate modeling of loads in the simulation environment that can closely mimic the behavior of the real-world load dynamics is a b...

Episode #8 | Taking Knowledge to the Next Generation

Episode #8 | Taking Knowledge to the Next Generation
Episode #8 | Taking Knowledge to the Next Generation While at DistribuTECH 2019, Host Ron Chebra had the opportunity to interview Rick Bush, T&D World and Mark Johnson, Utility Analytics Institute and talk about the next generation of engineers in our industry - how to make an environment where they want to work and play. Plus, they chat about how to ensure we don't create a swamp out of the data we're collecting. All that and more in this episode. ...

A Benchmark Test System to Evaluate Methods of Harmonic Contribution Determination | IEEE Xplore

A Benchmark Test System to Evaluate Methods of Harmonic Contribution Determination Published via IEEE Xplore Abstract Harmonic distortions at a point of common coupling (PCC) are caused by the harmonic sources in both supply system and customer facilities. In order to verify compliance with harmonic limits for an operating facility, it is essential to determine the contribution of a facility to the harmonic distortions measured at the PCC. Over th...
X